Tech Support Knowledgebase Browse
 
Tools
Rss Categories

iGO [Street mode] - No guidance indicators or voice prompts when a route is active

Author: Robert Taylor Reference Number: AA-00408 Views: 5234 Created: 2014-05-05 12:52 Last Updated: 2014-05-05 13:06 100 Rating/ 2 Voters

If your iGO map screen looks like the following, then it indicates that you have a destination active, but you have changed the iGO Navigation mode from On-Road to Off-Road.

iGO - Route Active - No Instructions

This indicates that iGO is only directing you with a straight-line ("as the crow flies") route.

The arrow in the upper-left corner indicates which direction to head in, and the distance indicates how far away the destination is.

Normally, you would NOT use this mode to navigate while in a normal road situation. If you have switched the option on by accident, you should turn it off again. Here's how:

Tap Route Settings on the Settings screen. You will see the following if you are in Off-Road Navigation mode.

iGO Route settings - Off-road mode ON


Tap the Navigation mode button to switch back to On-Road Navigation mode. The screen will change, and there will be some extra options displayed. These options are only visible when in on-road navigation mode:

iGO settings - On-road mode

Note that On-Road Navigation mode is the default ("out of the box") setting.

Normally, 4WD mode would be used when navigating in off-road areas, and in iGO it works in  a similar fashion to the 4WD mode - OziExplorer on the Navigator units.



Please rate articles! It helps us to ensure that you can find relevant information in the Knowledgebase.
You can use the Please rate this article option from the Tools menu at upper-right.
Comments left when rating articles are not replied to, although they are viewed and taken into account.
If you have an issue you need help with, please submit a ticket at Hema Tech Support

Content found in the Knowledgebase is accurate as at time of publication.
Copyright © 2015 Hema Maps Pty Ltd